POLYESTER SPRAY FILLER - is a highly effective two component spray, high build polyester filler. It is use to fill large scratches and critical surface irregularities resulting from processing previously applied filler coats. It is marked by good filling properties, short hardening time, easy sanding and forms a perfect, smooth surface after sanding the cured coat. Provides great anti sagging qualities and isolation properties. Due to thixotropic features it doesn’t flow down and it can be applied in relatively thick layers even on large vertical surfaces. After application and sanding it can be painted with all paint systems except thermoplastic, acrylic system, paint primed surfaces and nitro synthetic paints. Do not use also on zinc and aluminum surfaces.


Lorem ipsum

Technical Data Sheet
Wear suitably respiratory equipment
100 gr 2,5 gr
Cup 4/20ºC
Pot life 25-30 min. (20ºC)
Nozzle diameter: 1,7-1,9 mm Air pressure 2-3 bar
1-2 normal coats Drying thickness: 90-110 um
Flash-off 5-10 min. at 20ºC
Dry to sand 25-35 min. (20ºC)
Store in cool place
Orbay Request Form

* Please fill out the form below to view the product brochure, SDS and TDS files.
Related files will be sent to your e-mail address.